Showing posts with label GHRH. Show all posts
Showing posts with label GHRH. Show all posts

What types of Growth Hormone Releasing Hormones are there


What types of Growth Hormone Releasing Hormones are there

Growth Hormone Releasing Hormones (GHRH) (amplifies the Growth Hormone Releasing Peptides (GHRP) initiated pulse):
- GRF(1-44) - half-life is less than 5-10 minutes
- GRF(1-29) Sermorelin - half-life is less than 5-10 minutes
- Modified GRF(1-29) or CJC-1295 w/o the DAC - Half-life at least 30 minutes
- CJC-1295 (with DAC) - Half-life measured in days

Growth Hormone Releasing Hormone (GHRH) pulses can only last less than 30 minutes before your body has used out the potential for a single growth hormone pulse. Since another pulse won't be generated for about 2.5 - 3 hours hormones that last more than 30 minutes up to 3 hours are not any more beneficial.

The administration of Growth Hormone Releasing Hormone (GHRH) creates a pulse of growth hormone release which will be small if administered during a natural growth hormone trough and higher if administered during a rising natural growth hormone wave.

What types of Growth Hormone Releasing Peptides are there?
Growth Hormone Releasing Peptides (GHRP) (Growth hormone pulse initiators):
- Ipamorelin is potent but the weakest growth hormone releaser. It does not increase cortisol or prolactin at any dose.
- GHRP-6 is very potent in effecting growth hormone release. It does not effect cortisol or prolactin up to a 100mcg dose, but does so minimally above 100mcg.
- GHRP-2 is a little bit more potent then GHRP-6. It also has a stronger effect on these hormones at all dosing levels rising to the high normal range for cortisol and prolactin.
- Hexarelin the strongest is a little more potent then GHRP-2. At all dosing levels it has the strongest impact on cortisol and prolactin with levels in the upper bounds of normalcy.

Growth Hormone Releasing Peptides (GHRP) can become desensitized with constant usage throughout the day. Ipamorelin and GHRP-6 do not desensitize as long as there are short breaks between doses minimal 2 hours. GHRP-2 does not desensitize in the lower dose ranges without short breaks. At high dose it is unclear, but some desensitization may occur. Hexarelin has been shown to desensitize without regard to dose and even with short breaks between doses. This effect shows up after 14 days of continuous use and may be avoided by either keeping doses low or taking a full day or two off every two weeks.

Growth Hormone Releasing Peptides (GHRP) are capable of creating a larger pulse of growth hormone on their own than Growth Hormone Releasing Hormone (GHRH) and they do this with much more consistency and predictability without regard to whether a natural wave or trough of growth hormone is currently taking place.

How much Growth Hormone Releasing Hormone (GHRH) should be used?
The saturation dose in most studies is defined as 100mcg or 1mcg/kg per growth hormone pulse.

How long should Growth Hormone Releasing Hormone (GHRH) be used?
In most studies no adverse side effects were reported with use for 4-8 weeks (per the dosage limits in the above answer) followed by 4 weeks of non-use.

How much Growth Hormone Releasing Peptides (GHRP) should be used?
The saturation dose in most studies on Growth Hormone Releasing Peptides (GHRP) is defined as either 100mcg or 1mcg/kg. However that would assume a 100% pure peptide. Note: In general you it is recommended that your dose is rounded up to 150mcg unless the manufacturer advises otherwise.

This means that 100mcg will saturate the receptors fully, but if you add another 100mcg to that dose only 50% of that portion will be effective. If you add an additional 100mcg to that dose only about 25% will be effective. Perhaps a final 100mcg might add a little something to growth hormone release but that is it.

If 100mcg is the saturation dose, you could add more (up to 300-400mcg) and get a little more effect. A 500mcg dose will not be more effective than a 400mcg, perhaps not even more effective than 300mcg.

The additional problems with higher dosages are desensitization and cortisol/prolactin side-effects.

Ipamorelin and GHRP-6 at the saturation dose of 100mcg does not really increase prolactin & cortisol but may do so slightly at higher doses. This rise is still within the normal range. It can be used at saturation dose (100mcg) three or four times a day without risk of desensitization.

GHRP-2 is more effective then GHRP-6 at causing growth hormone release but at the saturation dose of a 100mcg or higher may produce a slight to moderate increase in prolactin & cortisol. This rise is still within the normal range although doses of 200 - 400mcg might make it the high end of the normal range. It can be used at saturation dose several times a day will not result in desensitization.

Hexarelin in general is the most effective at causing an increase in growth hormone release. However it has the highest potential to also increase cortisol & prolactin. This rise will occur even at the 100mcg saturation dose. This rise will reach the higher levels of what is defined as normal. It has been shown to bring about desensitization but in a long-term study the pituitary recovered its sensitivity so that there was not long-term loss of sensitivity at saturation dose. Even at 100mcg three times a day will likely lead to some down regulation within 14 days.

If desensitization were to ever occur for any of these Growth Hormone Releasing Peptides (GHRP) simply stop administering them for several days and this will remedy the effect.

How long should Growth Hormone Releasing Peptides (GHRP) be used?
In most studies no adverse side effects were reported with continuous use per the dosage limits in the above answer.

Does Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP) work together better?
It is well documented and established that the concurrent administration of Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP) results in synergistic release of growth hormone from pituitary.

In other words if Growth Hormone Releasing Hormone (GHRH) contributes a growth hormone amount quantified as the number 2 and Growth Hormone Releasing Peptides (GHRP) contributed a growth hormone amount quantified as the number 4 the total growth hormone release is not additive (i.e. 2 + 4 = 6). Rather the whole is greater than the sum of the parts such that 2 + 4 = 12.

Can Growth Hormone Releasing Hormone (GHRH CJC-1295) be used alone?
The problem with using only Growth Hormone Releasing Hormone (GHRH) (even the stronger analogs) is that they are only effective when somatostatin is low (the growth hormone inhibiting hormone). So if you administer it in a trough (or when a growth hormone pulse is not naturally occurring) you will add very little growth hormone release. If however you administer it during a rising wave or growth hormone pulse (somatostatin will not be active at this point) you will add to growth hormone release.


Can Growth Hormone Releasing Peptides (GHRP) be used alone?
Yes. They are capable of creating a larger pulse of growth hormone on their own than Growth Hormone Releasing Hormone (GHRH) and they do this with much more consistency and predictability without regard to whether a natural wave or trough of growth hormone is currently taking place.

What is a typical protocol for Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP)?

Studies have suggested the following:
A typical conservation protocol would be:
100-200mcg of Growth Hormone Releasing Peptides (GHRP)
Approximately 5-7 days a week - subcutaneous injections

This can be used once, twice, three or four times a day to make it more effective.
When dosing multiple times a day at least 3 hours should separate the administrations.

A more aggressive protocol would be:
100-200mcg of Growth Hormone Releasing Peptides (GHRP) plus
100-300mcg of Growth Hormone Releasing Hormone (GHRH).
Approximately 5-7 days a week - subcutaneous injections

This can be used once, twice, three or four times a day to make it more effective.
When dosing multiple times a day at least 3 hours should separate the administrations.

Studies suggest that a once a day dosing pre-bed will give a restorative amount of growth hormone while multiple dosing and/or higher levels will give higher growth hormone & IGF-1 levels which will lead to muscle gain, fatloss and/or injury repair.

Should food be consumed before or after the injection of Growth Hormone Releasing Hormone (GHRH) and/or Growth Hormone Releasing Peptides (GHRP)?
Studies have shown that administration should ideally be done on either an empty stomach or with only protein in the stomach. Fats and carbohydrates blunt growth hormone release. After administering the peptides wait about 20 minutes (no more than 30 but no less than 15 minutes) to eat. At that point the growth hormone pulse has reached its peak and you can eat what you want.

Synthetic Growth Hormone

What is Human Growth Hormone (HGH) Fragment 176-191?
The HGH Fragment is a modified form of amino acids 176-191 at the C-terminal region of the human growth hormone (HGH). Studies have shown that it works by mimicking the way natural HGH regulates fat metabolism but without the adverse effects on insulin sensitivity (blood sugar) or cell proliferation (muscle growth) that is seen with unmodified HGH. Like unmodified GH, the HGH fragment 176-191 stimulates lipolysis (breaking down of fat) and inhibits lipogenesis (the formation of fatty acids and other lipids in the body).

HGH fragment 176-191 is meant to be 12.5 times stronger than human growth hormone (HGH) for weight loss than standard human growth hormone (HGH).

Of particular note is that in studies HGH fragment 176-191 had the ability to increase IGF-1 levels which translates into the fragments ability to give anti-aging effects.

How much Human Growth Hormone (HGH) Fragment 176-191 should be used?
In most studies favorable results have been shown with dosages between 500-1000mcg or 5-10mcg/kg split into multiple dosages per day.

How long should Human Growth Hormone (HGH) Fragment 176-191 be used?
In most studies no adverse side effects were reported with continuous use per the dosage limits in the above answer.

What is a typical protocol for Human Growth Hormone (HGH) Fragment 176-191?
Studies have suggested the following:
A typical conservation protocol would be:
250mcg in the morning plus
250mcg pre lunch plus
250mcg in the evening (pre-bed).
Approximately 5-7 days a week - subcutaneous injections

A more aggressive protocol would be:
350mcg in the morning plus
350mcg 30 minutes prior to training
350mcg in the evening (pre-bed).
Approximately 5-7 days a week - subcutaneous injections

When dosing multiple times a day at least 3 hours should separate the administrations.

Should food be consumed before or after the injection of Human Growth Hormone (HGH) Fragment 176-191?
Studies have shown that administration should ideally be done on either an empty stomach or with only protein in the stomach. Fats and carbohydrates blunt growth hormone release. After administering the peptides wait about 20 minutes (no more than 30 but no less than 15 minutes) to eat. At that point the growth hormone pulse has reached its peak and you can eat what you want

More Peptide Info...




Basic peptide guide

Basic peptide guide


Peptide Information

Insulin-like Growth Factor LR3 (IGF-1)


IGF-1 LR3 Dosage(Long R3 IGF-1):
Light: 25 mcg
Common: 50 mcg
Large: 100 mcg
IGF-1 is administered for one month, give or take a week.
Insulin-like Growth Factor (Long-R3 IGF-1), an 83 amino acid analog of IGF-1 is a highly anabolic hormone released primarily in the liver with the stimulus of growth hormone (HGH).

IGF-1 is the most potent growth factor found in the body and causes muscle cell hyperplasia.
Freeze dried (lyophilized) IGF-1 (in powder state) should be stored in the freezer (-18 degrees Celsius).
Example Long r3 IGF-1 kit contains:
1000mcg of lyophilized (freeze dried) Long R3 IGF-1
2 mls of 0.6% Acetic Acid (AA)
30ml Sodium Chloride (NaCL) as buffer
Dilute the IGF-1 peptide with 2mls of Acetic Acid (.6%). Assuming (*DO NOT ASSUME*) Acetic Acid (AA) will yield the correct pH balance of your research peptide.
Note: This creates a concentration of 500mcg/ml. So each 1/10 of a ML is 50mcg’s.

Draw the desired amount of IGF in to a syringe. Desired amount should be the approx. dosage wanted.
Example- 2mls AA used to reconstitute IGF-1 1mg vial means 5 units on a U100 insulin syringe would equal 25mcg IGF-1 LR3
Pre-load your syringes at 5iu (25mcg IGF-1). Divide your IGF-1 into 40 syringes for storage in the freezer.
Thaw prior to administration. Draw from your NaCL after thawed to buffer (.5ml is enough).

Unknown whether injecting IGF-1 to increase muscle growth is efficacious. Many believe in the value of this powerful growth factor.
It is possible to go into hypoglycemia fro IGF-1 supplementation. Effect is dose dependent.

(information in this thread gathered via the internet)


Melanotan peptides, PT-141, CJC-1295, GHRP-6, IGF-1 LR3, GH fragments, come in the form of freeze dried powder using Bacteriostatic Water (BW) for reconstruction and preservative. Research peptides are supplied in multiple-dose vials from which repeated withdrawals may be prepared for subcutaneous injection (administrated intramuscularly in rare instances).

 Melanotan 1 - Melanotan is a synthetic (potent) version of melanocyte stimulating hormone (a-MSH). Afamelanotide treatment induces skin pigmentation through melanogenisis, the production of melanin. Melanin prevents cellular damage in the skin by absorbing, reflecting and refracting light. Melanotan reduces sun damage to UV exposed skin in those with sun allergies.

Melanotan 2 - Melanotan II is a cosmetic product that stimulates a natural increase in melanin production. Melanin is the main determinant of skin color in humans, a brown pigment which causes skin to become darker in appearance, instead of red, when exposed to UVR. Users of Melanotan II develop a gradual, natural tan with minimal sun exposure. Melanotropins useful for all skin types, particularly fair-skinned (Fitzpatrick skin type 1 & skin type 2).

Bremelanotide (PT-141) - Unexpected sexual arousal experienced by Melanotan 2 tanning trial subjects led to development of Bremelanotide PT-141. PT-141 does not act upon the vascular system, but the nervous system (cacading direct from the brain). Bremelanotide results are the world's only synthetic aphrodisiac developed after Melanotan 2 (MT-II).
 
GH Releasing Peptide-6 - GHRP 6 is a synthetic hexapeptide (six amino acid peptide) that releases growth hormone release. High levels of growth hormone have been associated with fat loss, muscle gain, general well being and anti-aging effects. Ghrelin effect from GHRP-6 can cause hunger. Ipamorelin, Hexarelin and GHRP-2 also bestselling GHRP research peptides.

GHRH (CJC-1295) - CJC-1295 (GHRH) continuously elevates Human Growth Hormone (HGH) and IGF-1. In the healthy body, large amounts of growth hormone are stored within the pituitary. CJC-1295 DAC has been proven to stimulate slow wave sleep helping restore the body. Research Sermorelin, CJC-1293, CJC1295, Mod GRF 1-29 (best) research peptide.

 Insulin-like Growth Factor LR3 - Insulin-like Growth Factor (Long-R3-IGF-1), analog of IGF-1 is a highly anabolic peptide released primarily in the liver with the stimulus of growth hormone. IGF-1 LR3 and IGF-1 DES popular glucose disposal agent analog peptides sold online. Dosage for IGF1 LR3 unspecific, whereas quick acting IGF DES pre-exercise administration recommended.

 191AA Growth Hormone (HGH) - Human Growth Hormone (rHGH, HGH, or GH) is a protein molecule consisting of 191 amino acids. Genetically engineered recombinant growth hormone is completely identical to the growth hormone made by the human pituitary gland. Growth hormone helps body composition and is rapidly converted to its powerful growth promoting metabolite, Insulin like Growth Factor (IGF-1).


 PEPTIDE INFO


Peptide Information


Peptides come in the form of lyophilized (freeze dried) powder. The amount of powder/product is stated in International Units (IU's) or in Milligrams (MG).
Melanotan peptides (Melanotan 1 & Melanotan 2), PT-141 Bremelanotide, GH Fragment, Ipamorelin, CJC-1295 & GHRPs (GRHP-2 & GHRP-6), HGH, HCG, et cetera use Bacteriostatic Water (BW). Bacteriostatic Water for injection, USP is a sterile, nonpyrogenic preparation of water for injection containing 0.9% of benzyl alcohol added as a bacteriostatic preservative. It is supplied in a multiple-dose container from which repeated withdrawals may be made to dilute or dissolve drugs for injection. The pH is 5.7 (4.5 to 7.0)

For IGF use an acetic acid solution (.6%) which is 7 parts distilled water and 1 part vinegar to reconstitute. You must filter the distilled water and white wine vinegar through a sterile 20 micron syringe filter before use. Sodium Chloride (NaCl) is used to buffer the injection.

1.) Take an alcohol swab to the stopper of both your peptide vial and the vial of the diluent.

2.) Draw your preferred diluent (BW) with a 1cc syringe. Choose an amount that will make measuring the final product simple.

1ml(cc) per 10 mg vial of Melanotan would mean each 10 tick marks on a U100 slin syringe would equal 1mg of Melanotan
1ml(cc) per 10 IU vial of HGH would mean each 10 tick marks on a U100 slin syringe would equal 1 IU of HGH

3.) Take the syringe with the diluent and push it into the vial of lyophilized powder letting the diluent dissolve the peptide. Many (not all) peptides are sealed with vacuum pressure, be careful.

4.) After diluent has been added to the vial, gentling swirl the vial until the lyophilized powder has dissolved and you are left with a clear liquid. The peptide is now reconstructed, ready for measurement and usage.
5.) Store your now reconstituted research peptides in the refrigerator.
Peptide Measurement
After successfully reconstituting your peptide, measure the desired amount out for injection. Use a U100 insulin syringe to draw out and inject your product.

Since you know the amount of IU's/MG's in your vial, we divide this out as follows:
You will need to know the following to be successful: 1ml = 1cc = 100 IU's

We take our dose from the label of the dry lyophilized powder and we divide that into the amount of diluent used.

Example- We used 1cc(ml) of water. We have a 10 IU vial of HGH.
From our formula above we know that 1cc = 100 IU's, so we have 100 IU's of water.
We now divide the 100 IU's (the amount of our water) by 10 IU's (the amount of our HGH)
100 IU / 10 IU = 10

This 10 will perfectly correspond with the markings on a U100 insulin syringe. In our example every 10 mark on our syringe will equal 1 IU of HGH. Want to draw out 2 IU's of GH? ....draw out to the 20 mark on the syringe (1/5th of the syringe).
Say you have a 1mg vial and you add 1ML you get
1000mcg/1mL: 10 mcg per IU
1000mcg/2mL: 5 mcg per IU
Say you have a 10mg vial and you add 1ML you get
10mg/1mL: 1 mg per 10 IU
10mg/2mL: .5 mg per 10 IU
Say you have a 20mg vial and you add 1ML you get
20mg/1mL: 2 mg per 10 IU
20mg/2mL: 1 mg per 10 IU
Say you have a 10iu vial and you add 1ML you get
10iu/1mL: 1 iu per 10 IU (on the syringe - 1/10th the product)
10iu/2mL: 1 iu per 20 IU (on the syringe - still 1/10th the product)
Say you have a 5000iu vial and you add 1ML you get
5000iu/1mL: 500iu per 10 IU
5000iu/2mL: 250iu per 10 IU

 Melanotan  1


Afamelanotide (M-I) Dose:
Light: .5mg
Common: 1mg
Large: 2mg
Melanotan 1 synthetic melanocyte stimulating hormone (a-MSH) induces skin pigmentation through melanogenisis, melanin production. Melanin prevents cellular damage in the skin by absorbing, reflecting and refracting light. Melanotan reduces sun damage to UV exposed skin transforming cells to produce dark protective melanin.

Melanotan Results: Melanotan favors production of eumelanin (black/brown) over pheomelanin pigment. Injecting this linear amino acid Melanotan 1 peptide offers super-physiological levels of tanning ability.

 Melanotan 2


Melanotan 2 Dose:
Begin: 100mcg
Light: 250mcg
Common: 500mcg
Stout: 1mg
Large: 1.5mg
Max: 2mg
What is Melanotan 2
Melanotan II analog of alpha-melanocyte stimulating hormone (a-MSH). Melanotan peptides are safe and efficacious with growing long term data. Melanotan 2 is a freeze dried peptide sealed in a sterile multi-use vial. Generic 10mg Melanotan II:

Melanotan injections act on melanocytes to stimulate melanin production. Melanin is the body's pigment responsible for a photoprotective safe tan.

Bremelanotide


Bremelanotide PT 141 Dose:
Light: .5mg
Common: 1mg
Large: 2mg
Bremelanotide PT-141 was developed from Melanotan 2 (MT-II). PT-141 is a metabolite of melanocyte stimulating hormone that targets desire.

Treatment: PT-141 is the only synthetic aphrodisiac. The aphrodisiac effects of Bremelanotide are in a class of its own. Studies have shown Bremelanotide to be effective in treating sexual dysfunction in both men (erectile dysfunction or impotence) and women (sexual arousal disorder). Nine out of ten volunteers experienced sexual arousal in clinical trials. Unlike Viagra and other related medications (PDE5s - blood pushers), PT-141 acts upon the nervous system. Viagra, Cials and Levitra are not considered aphrodisiacs as they do not have any direct effect on the libido. However, treatment with PDE5 inhibitors and PT-141 have known synergy.

Men's Journal Magazine: ...it took hold. I felt a great surge of affection (greater than any regular level of arousal). My body tingled and I developed an erection that wouldn’t quit. For two hours the drug wouldn’t let me out of its grasp — nor my wife out of mine. -Frederick Kaufman

Females: Women who took part in trials said that they felt a "tingling and a throbbing" along with "a strong desire to have sex." An initial flush occurs post injection, followed by nausea which is dose dependent. For most, effects generally do not take place until a couple hours post injection, peaking around the four hour mark. Men said PT-141 made them feel "younger and more energetic" as well as sexually interested and aroused. "You're ready to take your pants off and go," said user "a product that makes you not only able to but eager to."
Bremelanotide PT-141 Peptide: Bremelanotide comes in 10mg vials. As a lifestyle peptide, the 10mg product is a lot to consume and may offer up to 20 doses when dosing conservatively. Research PT-141 reconstituted with bacteriostatic water remains potent in the fridge for months.
Window of Opportunity: Bremelanotide, injected (subcutaneously), has a unique window of opportunity lasting six to 72 hours. In lab trials female rats exposed to PT-141 began "flirting" with male rats for sex. Postures and movements left no doubt in the male rats minds that they were in the mood. The human PT-141 date is one where the dosage precedes the activity by at least a couple hours. When the stars align, hours after the injection, ...this is your window of opportunity, enjoy.
Mixing: Bacteriostatic water is used for reconstitution.
Example- 1ml(cc) bacteriostatic water per 10mg PT-141 vial equates to a 1mg dose approximately each 10 units on a U100 insulin syringe.
Example- 1ml(cc) bacteriostatic water per 2mg PT-141 vial equates to a 1mg dose approximately every 50 units on a U100 insulin syringe.
Recommended strategy for mixing and dosing would be to reconstitute with the volume that yields a .1ml injection.
Example- 1ml(cc) bacteriostatic water per 10mg PT-141 vial equates to a 1mg dose approximately each 10 units on a U100 insulin syringe.
Example- .2ml(cc) bacteriostatic water per 2mg PT-141 vial equates to a 1mg dose approximately every 10 units on a U100 insulin syringe.
Dosing: Read as much as possible to gain clarity and align expectations. Gradually dosing increases likelihood for success without sides. A test dose of .25-.5mg on the first attempt is recommended. 1mg, give or take a quarter, is the efficacious dose which yields the most positive reports by users.

Ghrp-6


GHRP-6 Hexapeptide Dosage:
Light: 50mcg
Common: 100mcg
Large: 150mcg
Growth Hormone Releasing Peptide (GHRP-6) is a peptide in the growth factor family. It has strong effect on the release of Human Growth Hormone (HGH) in a specific and dose-related manner. GHRP can be effectively used in the treatment of growth hormone (GH) deficiency. Growth hormone releasing hexapeptide works by signaling the pituitary gland to begin growth hormone secretion.

Increased GH and IGF-1 levels are desirable for those looking to improve physique. Human growth hormone has been known to enhance immune response and stimulate the immune system, particularly older subjects. Dosed at night for anti-aging purposes and multiple times throughout the day for anabolism. GHRP is often used in conjunction with GHRH CJC-1295 (mod GRF 1-29) to amplify growth hormone pulse. Avoid fats and carbohydrate a half hour on each side of dosing GHRP-6.

Bodybuilders and athletes dose GHRP in an effort to build more muscle and burn fat. Some GHRP-6 users include it in their post cycle therapy (PCT). Cycling GHRP-6 in the off weeks from IGF/GH cycles is also becoming prevalent. Researchers wish to kick-start their body into producing their own natural GH & IGF, while gaining as if they remained on the GH/IGF peptides.

GHRP-6's main use is to promote food intake by stimulating hunger and aid in energy metabolism. The major side effect being a significant increase in appetite due to a stimulating the release of Ghrelin (about 20 minutes post injection), a hormone released naturally in the lining of the stomach and increases hunger and gastric emptying. This is why GHRP-6 can be used in the treatment of cachexia (wasting), eating disorders and obesity.

Benefits of increased HGH levels through GHRP-6 stimulation include: an increase in strength, muscle mass and body fat loss, rejuvenation and strengthening of joints, connective tissue and bone mass. Enhanced HGH secretion also leads to the liver secreting more IGF-1, which is thought to be the primary anabolic mechanism of action for Growth Hormone.
Bodybuilding Peptide GHRP-6:

Mixing: Bacteriostatic water is used for reconstitution. When diluted, peptide lasts a very long time when left alone in the refrigerator (months)

Example- 2.5ml(cc) bacteriostatic water per 5mg GHRP vial equates to a 100mcg dose approximately each 2-3 marks on a U100 insulin syringe.
Example- 5ml(cc) bacteriostatic water per 5mg GHRP vial equates to a 100mcg dose approximately every 5 marks on a U100 insulin syringe.

Dosing: The saturation dose of GHRP-6 has been determined to be around 100mcg. More is not better in regards to this secretagogue

5mg GHRP = 5,000mcg

5,000mcg/100mcg = 50 100mcg GHRP doses per 5mg

Growth Hormone Releasing Hormone (CJC-1295)



Modified GRF 1-29 (GHRH) CJC1295 Dosage:
Light: 25mcg
Common: 50mcg
Large: 100mcg
Growth Hormone Releasing Hormone (GHRH) CJC-1295 is a synthetic secretagogue which stimulates HGH release. In the human body, large amounts of growth hormone are stored in the pituitary. GHRH affects the number of secreting cells and the amount they are able to secrete. GHRH Analog research peptides sold online are a fantastic addition to GHRP (GHRP-6 & GHRP-2).

Dosing GHRH once at night for anti-aging purposes and multiple injections (1-3x) for anabolism. CJC-1295 has the ability to make the body produce its own GH as compared to using synthetic HGH. GHRP-6 use in conjunction with CJC-1295 is synergistic, amplifying the GH pulse considerably. Synthetic GH side effects can be experienced with pure growth factor peptides. Researchers also report positive effects much like that of HGH. Particularly energy, quality sleep, fat loss/metabolism, improved skin quality, pumps in the gym and numb/tingles at extremities.

CJC-1295 is typically found in 2mg vials. Reconstitute with BW. Inject subcutaneously. Generally best to invest in shorter acting modified GRF 1-29 as CJC-1295 manufacturing is difficult and fragile. GHRH (mod GRF 1-29) dose has 30 minute half life, superior to that of Sermorelin. Post injection flush is common. Ipamorelin is increasingly popular research peptide alternative. Genuine CJC-1295 DAC bloats male researchers, best to avoid real CJC-1295.



More Peptide Info...




CJC-1295 Growth Hormone Releasing Hormone

CJC-1295 Growth Hormone Releasing Hormone

 
Modified GRF 1-29 CJC-1295 Dosage (GHRH):
Light: 25mcg
 Common: 50mcg
 Large: 100mcg

Growth Hormone Releasing Hormone CJC-1295 is a synthetic secretagogue which stimulates HGH release. In the human body, large amounts of growth hormone are stored in the pituitary. GHRH affects the number of secreting cells and the amount they are able to secrete. GHRH Analog research peptides sold online are a fantastic addition to GHRP (GHRP-6 & GHRP-2).

 Dosing CJC-1295 GHRH protocols range from once at night for anti-aging purposes and multiple injections (1-3x) for anabolism effects. CJC-1295 has the ability to make the body produce its own GH as compared to using synthetic HGH. GHRP-6 use in conjunction with CJC-1295 is synergistic, amplifying the GH pulse considerably. Synthetic GH side effects can be experienced with pure growth factor peptides. Researchers also report positive effects much like that of HGH. Particularly energy, quality sleep, fat loss/metabolism, improved skin quality, pumps in the gym and numb/tingles at extremities.

CJC-1295 is typically found in 2mg vials. Reconstitute with BW. Inject subcutaneously. Generally best to invest in shorter acting modified GRF 1-29 as CJC-1295 manufacturing is difficult and fragile. GHRH (mod GRF 1-29) dose has 30 minute half life, superior to that of Sermorelin. Post injection flush is common. Ipamorelin is increasingly popular research peptide alternative. Genuine CJC-1295 DAC bloats male researchers, best to avoid real CJC-1295.

More...




HGH - Human Growth Hormone Guide

HGH - Human Growth Hormone Guide



The intention of this guide is to give you a good basic working knowledge of HGH and how to intelligently use it. While this is not intended to cover every conceivable nuance of HGH use, it should provide you with a solid enough background to create your cycle around.

Few other hormones have generated more excitement and hype in recent years than HGH. From reports of incredible fat loss to tales of increases in lean muscle to levels that defy genetics, HGH has been touted as one of the panaceas to all bodybuilding woes. Depending on which statistics you trust, reports of as many as 80% of professional athletes have experimented with, have used, or are actively using HGH as a supplement to their training program.

WHAT EXACTLY IS HGH?

Human Growth Hormone (somatotropin - also referred to as rHGH, HGH, or GH) is created by the pituitary gland, the primary form consisting of a 191 amino acid chain. When we are young, HGH is in big part responsible for the proper growth of bones, muscle, and other tissues. Too little of this hormone and we remain dwarfs … too much and we become giants and/or suffer from abnormal growth deformities. As we become adults, HGH is responsible for keeping muscles from wasting away, supports healthy immune system response, regulates aspects of our metabolic function dealing with increased fat metabolism and healthy body composition in later life, and maintains and repairs our skin and other tissues.

Our levels of HGH peak while we are adolescents and then begin to drop off sharply beginning in our 30’s. By our 60’s, our daily HGH secretion can be as little as 10% of what it was during our youth. Many of the markers of aging are affected by this decrease in HGH. Some of the results of this are:

· Increase in fat.
· Decrease in muscle and lean body structures.
· Decreased skin texture resulting in a less youthful appearance.
· Decreased bone density, onset of osteoporosis.
· Decreased brain function, loss of intellect with aging.
· Decreased sex drive.
· Decrease in overall physical and mental well being.
· Increase in sleep disorders, lower quality of sleep.
· Depression and fatigue.

The addition of supplemental HGH beginning in the latter 30’s can reverse or improve these symptoms in the majority of people attempting therapy. This is why you will often hear references with respect to HGH as “the fountain of youth” and other similar terms. It can present a better quality of life for those aging.

HOW IS HGH RELEASED IN YOUR BODY?


HGH is secreted from the pituitary in a pulsatile fashion, generally following a circadian rhythm. A number of stimuli can initiate an HGH secretion, the most powerful being short duration, high intensity exercise and sleep. During the first few hours of sleep (deep sleep stages – about 2 hours after you fall asleep), Somatostatin is turned off and GHRH is turned on, resulting in HGH pulses.

Growth Hormone Releasing Hormone (GHRH) produced by the hypothalamus stimulates HGH secretion. HGH, and IGF-1 create a negative feedback loop, meaning when their levels are high; it blunts release of GHRH, which in turn blunts the release of more HGH.

Somatostatin (SS), secreted by the hypothalamus as well as other tissues inhibits the secretion of HGH Somatostatin in response to GHRH and to other stimulatory factors such as low blood glucose concentration. High levels of IGF-1 also stimulate Somatostatin secretion.

Ghrelin is a peptide hormone secreted from the stomach. Ghrelin binds to receptors on somatotrophs and potently stimulates secretion of growth hormone. Ghrelin, as the stimulator for the growth hormone secretagogue receptor, potently stimulates secretion of growth hormone. The ghrelin signal is integrated with that of growth hormone releasing hormone and Somatostatin to control the timing and magnitude of growth hormone secretion.

Once HGH is released, it is very short lived. It is generally metabolized and gone within a half-hour. During this half-hour, it travels to the liver and other tissues and induces them to secrete a polypeptide hormone called Insulin-like Growth Factor One (IGF-1).

HOW DOES HGH DO ITS WORK?


As mentioned above, HGH is short lived, but during its short half-hour or so activity per burst from the pituitary, it exerts itself through direct and indirect effects.

Its direct effects are the result of the HGH binding its receptor on target cells. Fat cells (adipocytes) as well as myocytes (muscle cells) have HGH receptors. On fat cells, HGH stimulates them to break down triglyceride and suppresses the fat cells ability to uptake circulating lipids.

Its indirect effects are in the process we described in the section above. When HGH travels to the liver, one of the results of its pass through the liver is the livers secretion of IGF-1. When this IGF-1 is secreted, it stimulates proliferation of chondrocytes (cartilage cells), which result in bone growth. It also plays a part in stimulating both the proliferation and differentiation of myoblasts (the precursor to skeletal muscle fibers). IGF-1 also stimulates amino acid uptake and protein synthesis in muscle and other tissues. Other tissues (muscle, etc.) are acted on by the presence of HGH, also inducing their release of IGF-1.

HGH stimulates protein anabolism in many tissues. This reflects increased protein synthesis, decreased oxidation of proteins, and increased amino acid uptake. As mentioned above, HGH enhances fat utilization by stimulating triglyceride breakdown and oxidation in fat cells (adipocytes).

HGH can affect the function of other hormones. HGH can suppress the abilities of insulin to stimulate the uptake of glucose in tissues and enhance glucose synthesis in the liver, though administering HGH actually stimulates insulin secretion and can create a state of hyperinsulinemia. This combination can lead to decreased insulin sensitivity, which in turn can lead to hyperglycemia. HGH can in the right circumstances also have a slight inhibitory effect on the function of our thyroid hormones (and actually vice versa as well), though this varies greatly from individual to individual. The vast majority of users have no need to worry about this at all. Others wishing to increase their metabolism or enhance certain of HGH’s functions may wish to consider low dose thyroid to their HGH cycle. We’ll offer some strategies later in this guide.

So, we are looking at a hormone that can assist with maintenance and healing of most of the body’s systems, can create new cartilage, bone, and muscle cells, can assist with protein uptake, decrease the oxidation of proteins, and can accelerate the rate at which fat is utilized. This paints the picture of the excitement that follows HGH. How then do we utilize this to our advantage? Let’s take a look at some strategies.

HOW DO I INCREASE MY LEVELS OF HGH?


There are a few strategies for increasing your own endogenous production of HGH. For the most part these aren’t going to give us a significant enough increase that would be necessary to promote all of the benefits mentioned above in their full measure, but for some (those still young) they will prove to be sufficient.

By adding several grams of Arginine and Glutamine to our daily supplement program, we can increase our levels of HGH. If we are very young or we are only in need of a modest jump in production, this may well do the trick. Short duration, high-intensity exercise (think heavy leg day – puking and all), will trigger our bodies to secrete a significant amount of HGH

Another possibility is to inject various related hormones or peptides. There are many available, such as GHRH, GHRP (and all of its analogs), and the like. These peptides are available from research companies and when injected at doses of 100mcgs per day, sub-q it does seem to show promise in increasing levels of HGH. At this stage the game, there isn’t a significant cost advantage to this over rHGH, but if we are trying to promote some of the other forms of HGH in addition to the primary form, or have no hope of securing a prescription for HGH (or other means of access) there may be an advantage to this course of action. Aside from these strategies, what are we left with? To state it simply, we need to inject exogenous rHGH.

INJECTIBLE HGH AND ITS USE


True HGH only comes in the form of a lyophilized powder. Any other form that you see advertised or run across is NOT the real deal. The only way to administer true HGH is by sub-q or intramuscular injection. You will see studies that use IV as their method of administration, but that is certainly NOT recommended (in fact it is just outright crazy), nor necessary in any way for getting all of the benefits HGH has to offer.

HGH is somewhat fragile by nature, and it needs to be protected from light and heat. HGH should be stored between 36 and 46 degrees Fahrenheit at all times both before and after its reconstitution.

There are a couple of American brands of HGH that can survive in normal room temperature for a reasonable amount of time BEFORE reconstitution (Genotropin – 3 months, Saizen – until expiration), but for the most part it is better to err on the side of safe rather than sorry. All brands of HGH should be refrigerated after being reconstituted, and all brands should be protected from light at all times.

RECONSTITUTING AND MEASURING YOUR HGH


So you now have a vial HGH in the form of lyophilized powder. The amount of this powder should be indicated on the vial somewhere. It will either be stated in Units (IU’s) or in Milligrams (mg). If it is stated in milligrams, the conversion is most commonly stated as 1mg = ~3IU’s (its really more precisely 1mg=2.7IU). We will use this 1mg = 3IU’s for our guide since this is the standard most commonly referenced by manufacturers.

What we need to do with this lyophilized powder is add some Bacteriostatic water (BW), Sterile Water, or even liquid vitamin B12 to reconstitute it and make it ready to inject.

What we choose to reconstitute it with should depend on how rapidly we use the GH. Bacteriostatic water is basically sterile water with 0.9% Benzyl Alcohol added, and this Alcohol keeps anything from growing in the water, thus making it safe for injection for the longest amount of time, up to three weeks. If the amount of GH in our vial is enough to last for a few weeks at our desired daily dosage, BW is the wisest choice. For the common use for bodybuilding (2-5 IU’s a day) and the more commonly used vial size (10 IU’s), it isn’t really as critical which of the above listed dilutents are used … the vial will be used up long before bacteria or anything begins to grow in our reconstituted HGH. It is really personal preference outside of the considerations listed above.

RECONSTITUTING



1.) Take an alcohol swab and swab the stopper of both your HGH vial and the vial of the dilutent (BW, sterile water, B12).

2.) Take a 3cc syringe with a 23 or 25 gauge needle (1″ or 1.5″) and draw up and amount of your preferred dilutent. The amount isn’t critical, other than making sure you know exactly how much you have used. The best rule of thumb is choose an amount that will make measuring the final product easy

example- 1ml(cc) per 10 IU vial of HGH would mean each 10 mark on a U100 slin syringe would equal 1 IU of HGH

2ml(cc) added to a 10 IU vial of HGH would mean that the 20 mark on a U100 syringe would equal 1 IU of HGH

3ml(cc) added to a 10 IU vial of HGH would mean that the 30 mark on a U100 syringe would equal 1 IU of HGH

3.) Take this syringe with the dilutent and push it into the vial of lyophilized powder, angling so that the needle touches the side of the vial, and avoiding shooting the dilutent directly on the lyophilized powder. Make it run slowly down the side of the vial (don’t let it forcefully rush in).

4.) After all of the dilutent has been added to the HGH vial, gentling swirl (do NOT agitate or violently shake the vial) until the lyophilized powder has dissolved and you are left with a clear liquid. The HGH is now ready for use. Store your now reconstituted HGH in the refrigerator. If you used BW to reconstitute it will be good for three weeks. If you used sterile water, it will be good for about 5 days.

MEASURING


After you have successfully reconstituted your HGH, now you need to know how to measure the desired amount out for injection. You will want to use a U100 insulin syringe to draw out and inject your HGH.

Here is the way to figure out how much to draw out. Since you know the amount of IU’s in your HGH vial, and you also know how much water you have diluted it with, we just divide this out as follows:

You will need to know the following to be successful -

1ml = 1cc = 100 IU’s

So we take our number of IU’s of HGH from the label of the dry lyophilized powder (most commonly 10 IU’s for all of the Jintropin users), and we divide that into the amount of dilutent we used.

example- We used 1cc(ml) of water. We have a 10 IU vial of HGH.
From our formula above we know that 1cc = 100 IU’s, so we have 100 IU’s of water.
We now divide the 100 IU’s (the amount of our water) by 10 IU’s (the amount of our HGH)

100 IU / 10 IU = 10

This 10 will perfectly correspond with the markings on a U100 insulin syringe. In our example every 10 mark on our syringe will equal 1 IU of HGH. Want to draw out 2 IU’s of GH? ….draw out to the 20 mark on the syringe.

This is about all there is to it. So to recap, just keep straight:

1.) How much actual HGH you are dealing with (read from the vial)
2.) How much water (dilutent) you are using to add to the actual HGH.
3.) Divide the amount of water in units by the amount of GH in units.
4.) This result will equal the measurement on your U100 Insulin syringe per unit of GH.
5.) multiply the number you get it step 4 by how many units you want to inject. This is the number to draw to on your syringe.

Now that we have a basic understanding of what HGH is, how it does its work, and how to reconstitute and measure it, lets look at some strategies for using this hormone to our best advantage.

STRATEGIES FOR USING HGH


There are many different approaches to taking HGH. The right approach for your particular situation will depend on your goals. For many, HGH is a general supplement to help maintain low bodyfat percentages and reasonable levels of lean body mass. For others who have reached their genetic potential for growth, HGH is a supplement that can assist in continued growth beyond what your parents gave you to work with. For yet others, it is a supplement that is used for general health and healing of injuries. Let’s look at each of these uses with respect to a reasonable HGH program.

For bodybuilders, HGH (and the IGF-1 that is a result of its use) is the only substance that can actually initiate hyperplasia, which in the interest of our use in bodybuilding equates to new muscle cells. While use of anabolic steroids can cause hypertrophy (the enlargement of existing muscle cells), steroids do not offer the ability to recruit and mature more muscle cells. HGH can. HGH also increases protein synthesis, which can be responsible for hypertrophy. HGH also strengthens and heals connective tissues, cartilage, and tendons. These uses are what make it so attractive to athletes in all sports, and in bodybuilding in particular.

To begin with, it should be stated that for the vast majority of HGH users, results are not rapid and earthshaking in nature. If your idea of using HGH is to get ripped in a few weeks, gaining 20 pounds of muscle in a matter of a month or two, or being miraculously healed in a matter of a few injections … you are likely in for a BIG disappointment. HGH does some pretty incredible things, but it HAS to be viewed as a long-term endeavor. A reasonable length HGH cycle would be 20-30 weeks in length. While you will always be able to find the one or two individuals who will make great strides in a short amount of time, the majority of us need to be dedicated to its use for the long haul for it to be a worthy venture.

As mentioned in our introduction to HGH, one of the major roles it plays in growth is by its acting on the liver, muscle cells, and other tissues, which in turn secretes IGF-1. This process is cumulative in nature, and it will take some time for your exogenous HGH use to bring your IGF-1 levels to create an environment conducive to optimal growth. While it is true that HGH begins shuttling nutrients to your muscles, and begins mobilizing fat from the first injection, these behind the scenes benefits will only be VISIBLE several weeks (up to 12) down the road.

HGH DOSING


For anti-aging, general health & healing, fat mobilization
And other purposes such as these –
A dose of 2-3 IU’s per day (~10 – 15 IU’s per week) will be sufficient. A dose of 1.5 - 2.0 IU’s is considered to be a full replacement dose for those in their middle age. Given we will get somewhere in the neighborhood of 70-80% absorption and utilization from our subQ injections, our 2-3 IU’s will for all intents and purposes equate to a full replacement measure of HGH.

For gaining lean muscle and substantially improving body composition –
For this purpose a dose of 5-10 IU’s per day (~25-50 IU’s per week) will be necessary. Most people that still have an alive and kicking pituitary will respond very well at a dose of 5 IU’s per day, though advanced bodybuilders and other large strength athletes will find that dose approaching 10 IU’s per day will be in order.
For maximum benefit in this regard, the addition of Testosterone and/or other anabolic should strongly be considered. For advanced use, other supplements like Insulin, and low-dose T3 or T4 would also be considerations.

Regardless of your goal, as a general rule the best way to begin your HGH program is to start with a low dose and ease your body into the higher doses. This will allow you to avoid (or at least minimize) many of the more common (and unpleasant) sides of HGH such as bloating and joint pain & swelling. Most people can tolerate up to approximately 2 IU’s per day with few sides, so that would be a good place to start.

For many using this as a general health supplement, that is as high as you will need to go. For others this will be only the start. Above 2.5 – 3 IU’s, I would definitely suggest that your split your injections into two per day instead of one unless it is just not feasible to do so. In my experiences, I have ran doses as high as 10 IU’s per injection, but at those doses I have suffered greatly with joint pain and bloating to the point of feeling like a Goodyear blimp. Also in my experimentation it seems that at least for me, keeping my individual doses down to 3-3.5 IU’s a piece, I more effectively elevate my IGF-1 levels while minimizing the need for mega-doses of HGH.

Here is what a good ramp up strategy would look like:
Weeks 1-4 = HGH 2 IU’s one injection
Week 5 = HGH 2.5 IU’s one injection
Week 6 = HGH 3.0 IU’s split into two injections of 1.5 IU’s each
Week 7 = HGH 3.5 IU’s split into two injections of 1.75 IU’s each
And so forth until you reach your desired dose.

If at any point in this progression you begin to have unbearable bloating or joint pain, drop the dose by 25% and hold it at this lower dosage for a couple of weeks. If the sides subside, begin your progression back up toward your desired level. If the sides remain, lower your dose again and hold it at the lower level for two weeks before beginning the upward progression. This method will keep your HGH experience a good one and side free for the most part.

For a normal cycle of 5-8 months in length, injecting once or twice a day, 7 days a week should be fine. While there are studies that suggest that the suppression and negative feedback from exogenous HGH is short lived (about 4 hours from time of injection), there are no large-scale studies to indicate safety of everyday injections in long-term use. There are studies by anti-aging groups demonstrating that a day or two off per week is adequate to protect the pituitary and its triggers over long cycles. If your use of HGH becomes more a lifestyle than a single cycle, I would consider running it 5 on/2 off, or 6 on/ 1 off until such time as we have reliable data demonstrating long-term safety sans any degradation of your own output or the triggers initiating that output. I have personally experimented with just about every conceivable injection strategy I could devise. What I can say about the anti-aging doctor’s supposition is that it panned out for me. I have recently come off of a 7-year run of HGH. I personally pull my own blood panels every six weeks routinely. After many months of being off of HGH, I now have the same profile I had before I began its use many years ago … high normal for my age. All levels and markers are perfectly normal.

Another option would be to run your HGH cycle everyday for the first two months to get your IGF-1 levels elevated quickly and to a level to assist you in an anabolic way, then drop back to 5 days a week. If you can tolerate the sides of higher doses, running the same weekly dose divided every other day is fine as well. The list goes on and frankly is an individual proposition. What seems to be of greatest import is that your weekly supplement of HGH is respectable enough to provide the desired benefit.

TIMING

As described above, the body produces HGH is a pulsatile fashion throughout the day with the heaviest pulses occurring approximately 2 hours or so after going to bed and as you fall into a deep sleep. Injectible HGH is completely absorbed and put to use within approximately 3 hours. The strategy with respect to timing depends somewhat on our age and the other elements of our cycle. As you will see below, there is no single best strategy … it depends a lot on your individual situation.

For those that are between their late 20’s and early 50’s, there is still a reasonable chance that your own endogenous production of HGH is at a reasonable level. The best time to take and injection, this being the case, would be early morning …. After your body’s own release of HGH in the night. If you get up to go to the bathroom in the early morning (3 -5am), this is probably the perfect time to take a couple of units of HGH. This will be the least disruptive time to take an injection of HGH. The second best time would be first thing in the morning when you wake up.

If you are splitting your doses, the two times of the day when your cortisol levels are at peak are when you wake up and in the early afternoon. This being the case, another good strategy is to take your HGH injections at these times. Cortisol is very catabolic by nature and a well -timed HGH injection can go a long way toward blunting this effect.

If you are in your late 50’s or beyond, or if for some reason you have a condition that has rendered your pituitary incapable of a normal release of HGH, a great time to take HGH is right before bed. This allows you to closely mimic the natural pattern that would occur if your pituitary were functioning properly. For the rest of us, taking your HGH right before bed is going to end up creating a negative feedback loop, robbing you of your body’s own nightly pulse of HGH. While the jury is still out (conflicting studies) as to the absolute nature of the negative feedback time, it is clear that the closer we push our injection to the time our body is ready to give us its biggest pulses of HGH, we are going to end up derailing our own triggers and secretion.

Yet another strategy should be considered if you are using insulin with your HGH. Insulin should be used immediately post workout. HGH and insulin do some great things together – they shuttle nutrients in a very complimentary way with each other, and the combination of HGH and Insulin create the best environment for IGF-1 production from the liver. If you are using insulin immediately post workout, taking a few IU’s of HGH pre-workout will allow HGH to offer all of its fat mobilizing effects while getting your HGH and Insulin to the liver at about the right time for huge IGF-1 releases.

SIDE EFFECTS – HOW TO MANAGE THEM

While HGH for the most part is well tolerated, there are some minor, mostly nuisance side effects that can occur. The biggest and most common side effect is bloating and joint pain. The chances of getting these can be minimized or even eliminated by utilizing the ramp up method discussed above in this guide.

If you are younger than your late 20’s, it would be very wise to enter an HGH cycle under the guidance of an MD, who can monitor and confirm whether your growth plates have fused. While abnormal bone growth with HGH use is not common, if used at the wrong point in your body’s development, it could cause disproportionate growth.

If you have a history of cancer or other tumors (at any age), it would be wise to get a complete checkup and be monitored by an MD to make sure that there are no active tumors before your HGH cycle. While HGH (and IGF-1) won’t cause cancer or tumors, they can create an environment that can allow already existing, active tumors to grow at an accelerated rate. We intentionally keep growth factor levels to a minimum in cancer patients. While tumors can create their own growth factors, we really don’t want to throw gas on the fire and allow them to grow any faster than they otherwise could.

Beyond these considerations, there really isn’t anything specific that you would HAVE to take with HGH. There are supplements that you could take for specific conditions that are possible with HGH use. The way people react to HGH is a pretty individual thing. Some people get very little suppression of any kind; others don’t see any gains from adding HGH because of significant enough suppression of one kind or another. Here’s a general rundown of a few of the bigger ones.

For the slight thyroid support that may be desired:
conservative - take nothing
moderate - t-100x, bladderwrack, coleus forskolin, selenium, zinc, chromium, copper
aggressive - T3 at a dose of 12.5 - 25 mcgs or T4 at 100mcgs per day.

For the insulin resistance that is possible:
conservative - 300mg of Alpha Lipoic Acid and 200 - 300mcgs of Chromium Piccinolate
moderate - 15mg of Actos - a prescription med to increase insulin sensitivity, Glucophage (Metformin) to dispose of excess glucose and increase uptake in muscles.
aggressive - add a few IU’s of insulin to your HGH cycle

For healthy test levels to best utilize HGH:
conservative - do nothing
moderate - use Tongkat or Tribulus
aggressive - add 200-300 milligrams (or more) of testosterone weekly to your HGH cycle

For protection against prostate growth:
conservative - do nothing
moderate - use Saw Palmetto (approx 2000mg)
aggressive - use Proscar or equivalent

For those that have a problem with breast tissue growth while on HGH:
For those that suffer from this, there is a difference of opinion as to the cause. In the presence of adequate estrogen, HGH can prompt growth of breast tissue. Also of consideration is that growth hormone, prolactin, and placental lactogen are a subfamily of a large 2-class cytokine superfamily of proteins. The amino acid sequences of hGH and hPL are similar (85% homology). In humans, each of these three proteins can bind hPRL receptors and promote a variety of physiological actions, including breast growth, lactation, and the like.
The current consensus seems to be that the best approach for those with this problem is twofold - Take 200mg of B6 (or Bromo if B6 is not sufficient) and also use 20-40mg of Tamoxifen (Nolva) to control this. If all else fails, a couple of months of Letro and Bromo will most certainly (and aggressively) deal with the problem. This is a pretty rare condition, but I have talked with more than a few bros that have reported this sort of problem.

Once again, I wouldn’t say that all (or any) of these are necessary for everyone. I would use these supplements as necessary to correct whatever conditions arise with your own HGH use. As stated above, reaction to HGH (and just about anything else we use) is very individual.

Hopefully this guide has given you a better understanding of HGH and what it can do for you. HGH, especially when used in conjunction with an AAS cycle, will produce some high-quality, lean mass gains. It can also be used in conjunction with IGF-1 and insulin, which will be the topic of a comparative guide, that I will finish writing and get posted one of these days


More Peptide Info...




CJC-1295 DAC

CJC-1295 DAC



Sequence: Tyr-DAla-Asp-Ala-Ile-Phe-Thr-Gln-Ser-Tyr-Arg-Lys-Val-Leu-Ala-Gln-Leu-Ser-Ala-Arg-Lys-Leu-Leu-Gln-Asp-Ile-Leu-Ser-Arg-Lys-(Maleimidopropionyl)-NH2
Purity: >99.5%

Description:  CJC-1295 DAC is a long-acting version of GHRH (Growth Hormone Releasing Hormone) which has had its half-life extended to 8 days. This is convenient as it means the product only needs to be injected once or twice per week for continuously elevated levels of Human Growth Hormone (HGH) and IGF-1. The advantage of using CJC-1295 DAC instead of actual HGH injections is that injecting HGH shuts down the body's own natural production and therefore when injections are ceased, the body’s ability to produce its own Growth Hormone may be impaired and take some time to recover. Since CJC-1295 DAC only stimulates the body's own GH production, this risk is not apparent.

Useful For: Bodybuilders looking to gain muscle; ordinary people looking to lose fat; older persons looking for anti-aging benefits.

CJC-1295 Storage: Vials are freeze-dried and therefore will remain stable at room temperature for 1-2 months. However, for long term storage they should be kept a 2-8 degrees celcius (refrigerator temperature), where they will remain stable for up to 18 months in powder form.
Once mixed with mixing solution, vials should be stored in the refrigerator and not left at room temperature.

NOTE: Do not mix up all your vials at once. You should only mix up 1 (one) vial at a time and leave the rest in powder form until you are ready to use the next vial.

Amount of Water to Mix: You can mix 1ml (1cc or 100 units), 2ml (2cc or 200 units), or 3ml (3cc or 300 units) of sterile water, sterile saline (0.09nacl) or bacteriostatic water. The amount of water you mix makes no difference to the products effectiveness. The only thing that will change with the differing amounts of water is the amount you have to inject to get a certain dosage. For ease of dosing, we recommend mixing 1ml of water per vial (unless you have difficulty dissolving the peptide). Note: If the product does not dissolve into 1ml of water within a few minutes, do not shake the vial, but instead try adding another 1ml or 2ml of water and leaving the vial to settle for 24 hours in the refrigerator.

CJC-1295 DAC Dosage:   Taken 1 or 2 times per week (once a week for anti-aging and 2 times per week for fat loss and/or muscle building). Males & Females = 1mg (0.50ml or “50” units on the Insulin Syringe if you have used 1ml for mixing, 1ml or “100” units if you have used 2ml of water for mixing and 1.5ml or “150” units if you have used 3ml of water for mixing).

Number of Dosages per vial: 2 x 1mg (1000mcg) dosages.

When to Take: Due to the long half-life, CJC-1295 DAC does not need to be taken on an empty stomach like other GH-Releasing peptides and it can be injected any time of day. If an optimal injection time had to be picked, it would be in the evening before bed.

How to Take: By subcutaneous injection into fat (stomach, thigh or buttock) or intramuscularly (bicep or shoulder) with an insulin syringe. Other peptides can be mixed in the same syringe and injected at the same time.

Possible Benefits: Fat loss, muscle gain, increased strength, improved skin tone, better sleep, more energy, stronger bones and connective tissues.

Possible Side Effects: Tiredness, water retention, tingling in hands and feet, temporary irritation (redness and/or lumps) at the injection site.

Best Combined With: GHRP-6, GHRP-2 or Ipamorelin.



More Peptide Info...




Growth Hormone Releasing Peptides and Hormones GHRP - GHRH

Growth Hormone Releasing Peptides and Hormones GHRP - GHRH

Growth Hormone (GH) Questions


What is growth hormone?

Synthetic Growth Hormone (Somatropin) is an artificially created hormone (made up of a sequence of 191 amino acids) that is identical to the one found in humans. Some common names of synthetic growth hormone include: Genotropin by Genentech, Humatrope by Eli Lilly, Nutropin by Genentech and Saizen by Serono. While many companies are capable of generating growth hormone not all of the companies are capable of creating the correct structure that is identical to naturally occurring growth hormone. The structure determines the strength with which the growth hormone molecule binds to a receptor which will in turn affect the "strength" of the events leading to protein transcription, metabolism, IGF-1 creation, etc. It is this inconsistency that accounts in part for the differences in effectiveness of various produced synthetic growth hormone. Synthetic growth hormone is not really true or natural growth hormone. It was manufactured in a laboratory and not by your pituitary.


Naturally produced Growth Hormone is produced in the anterior pituitary. It is made up of a blend of amino acids with the majority of them being the 191 amino acid variety.

How does growth hormone work?

Growth hormone in the body is released in a pulsating fashion. It has been demonstrated that this pattern promotes growth. The pituitary is capable of rather quickly synthesizing very large amounts of growth hormone which it stores in both a finished and unfinished form. Adults rarely experience growth hormone pulses that completely deplete these stores. As we get older we do not lose the ability to create and store large amounts of growth hormone, rather we experience a diminished capacity to instruct their release. The growth hormone pulse is measured in a wave with the trough being the “off” or non-secretion of growth hormone and the crest being the “on” or highest point during growth hormone secretion.

The volume of growth hormone that is released in the body cannot be properly compared to the administration of synthetic growth hormone for the reason that a set of behavioral characteristics associated with natural growth hormone differ from those of synthetic growth hormone. Therefore attempting to find a natural growth hormone to a synthetic growth hormone equivalency is not very productive because in the end what is probably most important is: The quantity and quality of intracellular signaling events and the degree to which growth hormone stimulates autocrine/paracrine (locally produced/locally used) muscle IGF-1 & post-exercise its splice variant MGF
.

How is natural growth hormone released?

Growth hormone release in the pituitary depends on 3 factors:
  1. Somatostatin which is the inhibitory hormone and responsible in large part for the creation of pulsation.
  2. Growth Hormone Releasing Hormone (GHRH) which is the stimulatory hormone responsible for initiating growth hormone release.
  3. Growth Hormone Releasing Peptides (GHRP) which is a modulating hormone and in essence optimizes the balance between the "on" and the "off" periods of growth hormone.

Naturally produced Growth Hormone


What types of Growth Hormone Releasing Hormone (GHRH) are there?

  • GRF(1-44) with a  half-life is less than 5-10 minutes
  • GRF(1-29) Sermorelin with a half-life is less than 5-10 minutes
  • Modified GRF(1-29) or CJC-1295 without DAC with a Half-life at least 30 minutes
  • CJC-1295 (with DAC) with a Half-life measured in days
Growth Hormone Releasing Hormone (GHRH) pulses can only last less than 30 minutes before your body has used out the potential for a single growth hormone pulse. Since another pulse won't be generated for about 2.5 - 3 hours hormones that last more than 30 minutes up to 3 hours are not any more beneficial.

The administration of Growth Hormone Releasing Hormone (GHRH) creates a pulse of growth hormone release which will be small if administered during a natural growth hormone trough and higher if administered during a rising natural growth hormone wave.

How much Growth Hormone Releasing Hormone (GHRH) should be used?

The saturation dose in most studies is defined as 100mcg or 1mcg/kg per growth hormone pulse.

How long should Growth Hormone Releasing Hormone (GHRH) be used?

In most studies no adverse side effects were reported with continued use.

Which Growth Hormone Releasing Hormone (GHRH) is the best to use? Modified GRF(1-29) or CJC-1295 without DAC is the best choice because it lasts at least 30 minutes. Growth Hormone pulses can only last less than 30 minutes before your body has used out the potential for a single growth hormone pulse.

What types of Growth Hormone Releasing Peptides are there?

Growth Hormone Releasing Peptides (GHRP) (Growth hormone pulse initiators):
  • Ipamorelin is potent but the weakest growth hormone releaser. It does not increase cortisol or prolactin at any dose.
  • GHRP-6 is very potent in effecting growth hormone release. It does not effect cortisol or prolactin up to a 100mcg dose, but does so minimally above 100mcg
  • GHRP-2 is a little bit more potent then GHRP-6. It also has a stronger effect on these hormones at all dosing levels rising to the high normal range for cortisol and prolactin.
  • Hexarelin the strongest is a little more potent then GHRP-2. At all dosing levels it has the strongest impact on cortisol and prolactin with levels in the upper bounds of normalcy.

Growth Hormone Releasing Peptides (GHRP) can become desensitized with constant usage throughout the day. Ipamorelin and GHRP-6 do not desensitize as long as there are short breaks between doses minimal 2 hours. GHRP-2 does not desensitize in the lower dose ranges without short breaks. At high dose it is unclear, but some desensitization may occur. Hexarelin has been shown to desensitize without regard to dose and even with short breaks between doses. This effect shows up after 14 days of continuous use and may be avoided by either keeping doses low or taking a full day or two off every two weeks.
Growth Hormone Releasing Peptides (GHRP) are capable of creating a larger pulse of growth hormone on their own than Growth Hormone Releasing Hormone (GHRH) and they do this with much more consistency and predictability without regard to whether a natural wave or trough of growth hormone is currently taking place.

How much Growth Hormone Releasing Peptides (GHRP) should be used?
The saturation dose in most studies on Growth Hormone Releasing Peptides (GHRP) is defined as either 100mcg or 1mcg/kg.

This means that 100mcg will saturate the receptors fully, but if you add another 100mcg to that dose only 50% of that portion will be effective. If you add an additional 100mcg to that dose only about 25% will be effective. Perhaps a final 100mcg might add a little something to growth hormone release but that is it.

If 100mcg is the saturation dose, you could add more (up to 300-400mcg) and get a little more effect. A 500mcg dose will not be more effective than a 400mcg, perhaps not even more effective than 300mcg.

The additional problems with higher dosages are desensitization and cortisol/prolactin side-effects.

Ipamorelin and GHRP-6 at the saturation dose of 100mcg does not really increase prolactin & cortisol but may do so slightly at higher doses. This rise is still within the normal range. It can be used at saturation dose (100mcg) three or four times a day without risk of desensitization.

GHRP-2 is more effective then GHRP-6 at causing growth hormone release but at the saturation dose of a 100mcg or higher may produce a slight to moderate increase in prolactin & cortisol. This rise is still within the normal range although doses of 200 - 400mcg might make it the high end of the normal range. It can be used at saturation dose several times a day will not result in desensitization.

Hexarelin in general is the most effective at causing an increase in growth hormone release. However it has the highest potential to also increase cortisol & prolactin. This rise will occur even at the 100mcg saturation dose. This rise will reach the higher levels of what is defined as normal. It has been shown to bring about desensitization but in a long-term study the pituitary recovered its sensitivity so that there was not long-term loss of sensitivity at saturation dose. Even at 100mcg three times a day will likely lead to some down regulation within 14 days.

If desensitization were to ever occur for any of these Growth Hormone Releasing Peptides (GHRP) simply stop administering them for several days and this will remedy the effect.

How long should Growth Hormone Releasing Peptides (GHRP) be used?

In most studies no adverse side effects were reported with continued use.

Which Growth Hormone Releasing Peptides (GHRP) is the best to use?

It depends on what results you are looking for:
  • Ipamorelin is good for fatloss and injury repair
  • GHRP-6 is good for gaining weight/bulking since it increases appetite.
  • GHRP-2 is good for muscle gain, fatloss and injury repair (some people have increased appetite).

Does Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP) work together better?

It is well documented and established that the concurrent administration of Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP) results in synergistic release of growth hormone from pituitary.

In other words if Growth Hormone Releasing Hormone (GHRH) contributes a growth hormone amount quantified as the number 2 and Growth Hormone Releasing Peptides (GHRP) contributed a growth hormone amount quantified as the number 4 the total growth hormone release is not additive (i.e. 2 + 4 = 6). Rather the whole is greater than the sum of the parts such that 2 + 4 = 12.

Can Growth Hormone Releasing Hormone (GHRH) be used alone?
The problem with using only Growth Hormone Releasing Hormone (GHRH) (even the stronger analogs) is that they are only effective when somatostatin is low (the growth hormone inhibiting hormone). So if you administer it in a trough (or when a growth hormone pulse is not naturally occurring) you will add very little growth hormone release. If however you administer it during a rising wave or growth hormone pulse (somatostatin will not be active at this point) you will add to growth hormone release.

Can Growth Hormone Releasing Peptides (GHRP) be used alone? Yes. They are capable of creating a larger pulse of growth hormone on their own than Growth Hormone Releasing Hormone (GHRH) and they do this with much more consistency and predictability without regard to whether a natural wave or trough of growth hormone is currently taking place.

What is a typical protocol for Growth Hormone Releasing Hormone (GHRH) and Growth Hormone Releasing Peptides (GHRP)?

A typical beginner protocol would be:
  • 50-100mcg of Growth Hormone Releasing Peptides (GHRP) plus
  • 50-100mcg of Growth Hormone Releasing Hormone (GHRH). 
2-3 days on 1 day off then repeat - before bed - subcutaneous injections

A typical intermediate protocol would be:
  • 100-200mcg of Growth Hormone Releasing Peptides (GHRP) plus 100-200mcg of Growth Hormone Releasing Hormone (GHRH).
3-4 days on 1 day off then repeat - before bed - subcutaneous injections

A typical advance protocol would be:
  •  100-200mcg of Growth Hormone Releasing Peptides (GHRP) plus
  • 100-200mcg of Growth Hormone Releasing Hormone (GHRH).
2 times daily - before breakfast and bed - subcutaneous injections
These protocols can be used once, twice, three or four times a day to make it more effective. When dosing multiple times a day at least 3 hours should separate the administrations.

Once a day dosing pre-bed will give a restorative/injury repair amount of growth hormone while multiple dosing and/or higher levels will give higher growth hormone & IGF-1 levels which will lead to muscle gain, fatloss and/or injury repair.

What are some of the possible side effects with Growth Hormone Releasing Hormone (GHRH) and/or Growth Hormone Releasing Peptides (GHRP)?

Reported side effects have included: hypersomnia (excessive sleeping), insomnia, muscle soreness (from muscle growth), burning feeling at injection spot (last 10-15 minutes). All side effects went away after 2-3days of discontinuing use.

Should food be consumed before or after the injection of Growth Hormone Releasing Hormone (GHRH) and/or Growth Hormone Releasing Peptides (GHRP)?

Administration should ideally be done on either an empty stomach or with only protein in the stomach. Fats and carbohydrates blunt growth hormone release. After administering the peptides wait at least 30 minutes to eat. At that point the growth hormone pulse has reached its peak and you can eat what you want


More Peptide Info...




Laymen's Guide to GHRH GHRP's

Laymen's Guide to GHRH GHRP's In effort to l
ist a protocol for the use of GHRP / GRF / and in combo with GH if desired I thought I would post my current protocol based upon the research I have done within the last year or so. Obviously the information I gathered is not based on medical studies completed by me but I do use the following protocol myself and have been pretty dammed impressed with the results. Recovery from injury is very impressive to me (any kind of injury). Example, 5 days ago I was lifted by the butt of a tree I cut down (long story). I had bruising and some serious raspberry on my under arm, left quad and my abs ( the but of the tree ran right up the front of my once it got under my arm it lifted me and tossed me about 10 feet through the air). Its been 5 days and all that is left of the raspberries are some faint red marks......amazing IMO.

Also: I encourage others to do their own research. Don't think all that I have written below is gospel or the only / best way to run these peptides. This is nothing more than my interpretation of what I have read and what I perceive as the best way to use peptides.

Best Choices for GHRP's.

GHRP-6 Good GH spike when used with a GRF, large increase in hunger. Elevates prolactin and cortisol levels
GHRP-2 Good GH spike, when used with a GRF, on par with GHRP-6 without the hunger. Elevates prolactin and cortisol levels
Ipamorelin good GH spike when used with a GRF. GH spike is not as high as GHRP-2 or 6 but it does not elevate prolactin or cortisol.


Note: in order for a GHRP to have a positive affect and create a GH spike alone one as to be very lucky in the timing and hope it is injected at time when Somatostatin is low in the body. Somatostatin blunts GH release in the presence of just GHRP. Using GRF will override the signal presented by Somatostatin so you will get a very dramatic GH pulse.


GRF's (GHRH)
Two choices

Mod GRF 1-29, higher GH peaks, short half life (30 minutes) most closely mimics your bodies own GH pulses but far greater amplitude
CJC 1295 long half life (7days). Lower GH amplitude when used with GHRP, raises the troughs in the bodies GH level profile, the downside is it creates GH bleed. Think of the GH as being stored in a jar until someone (thing) opens up the faucet. It is best if the jar is full and then dumps. CJC does not allow the jar to fill. Current recommendations are to avoid CJC


Saturation dose for any of the GHRH's or GHRP's including Ipamorelin is 100mcg (or 1mcg / kg of bodyweight) so this is all based on a 100mcg dose.

As you may know, it is best to pin 1.5 to 2 hours after eating any fats or carbs and then after you pin don't eat any fats or carbs for 20-30 minutes as they will blunt the GH release. Pure protein is OK but I try to avoid all foods. Also, pure protein is OK anytime prior to pinning.


Dosings should be 3 hours apart or more.

Mornings upon waking pre cardio (if you are doing any), afternoon (or PWO) and before bed pin mod GRF 1-29 / GHRP (or Ipamorelin) @ 100mcg / 100mcg. (2 pinnings per day are also adaquate for improvements in recovery, better sleep etc. 3 will make you a bit more anabolic than 2 and you can even go 4 if the pocket book allows.

If you include GH in this protocol it should be 10 minutes after the peptides. So, first pin the peptides, wait 10-15 minutes and then pin your GH. Reason being is that Exogenous GH administration can also blunt GH release.

Wait 20-30 minutes after pinning the peptides and you are free to eat.

When you recon your peptides use as little BW as you can. I don't go as low as some people because I figure I don't want to leave a drop of highly concentrated peptide in the vial that I can not get out. The less BW used for recon the less the degradation of the peptide over time.

If you premix a shot ahead of time, don't let it sit mixed for more than 8 hours or so. When mixed they will exchange ions and who know what the final compound would be called :-). I actually have a way to preload without mixing the peptides until I am ready to pin it.

Do not pin IGF within 1 hour of pinning your peptides. IGF has a feedback loop that inhibits GH release.

With the above for pinning around workouts to get the most of your investment....

Pin insulin (humalin R) immediately PWO
wait 10 minutes pin peptides
If using GH wait 10 more minutes and pin the GH (see above for reasoning)
If using IGF wait approx. 1 hour PWO and pin the IGF.

IGF blunts GH release. another reason to wait is in effort to keep the IGF local you want to wait until you lose your pump. Blood flow is reduced in teh area of injection. if you pin IGF immediately PWO blood flow is still very high so the IGF get transported away too quickly..


For convenience...
Pin insulin Pre work out.... Humalin R is active for 4-5 hours
PWO pin peptides (or if you want to pin slin and peps at the same time PWO)
10 minutes after peps pin GH if you are using GH
30-60 minutes PWO pin IGF if using IGF

by Bilter


More Peptide Info...